Doug McLean’s Sonex

SonexAus – Doug McLean’s Sonex Link to Doug’s Sonex build website: click here

100_1481.JPG
Goulburn NSW
100_1485.JPG
100_1488.JPG
100_1491.JPG
100_1496.JPG
100_1545.JPG
Lake George NSW
100_1548.JPG

dougs photos 019.jpg

I made this in an attempt to reduce a large spread of EGT’s, #1 was lean and #4 way too rich.
it is made from 3 inches of 2 1/4″ 6061 and two smaller diameter tubes I cut from an old windsurfer boom.
I inserted it in the SCAT between the air filter and the carb, about 1 1/2 inches from the carb.
the EGT’s are now a lot better.

IMG_0781[1].JPG
Crookwell NSW
IMG_0901.JPG
Mungo Lodge

email: dougmcl(at)hotmail(dot)com

Discussions